Reassembling The Belt Unit And Cleaning Unit - Ricoh D014 Service Manual

Image Transfer Unit

Reassembling the Belt Unit and Cleaning Unit

1. Insert one sheet of A4/LT paper under the lubricant blade as shown to protect the
corner seals of the belt cleaning unit.
The paper should be under the under the blade as shown above, not over the
blade.
2. Lower the belt unit [A] onto the cleaning unit [B].
3. Reassemble the belt unit and belt cleaning unit.
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
3-80
CÓPIA NÃO CONTROLADA
SM