Ricoh D014 Service Manual page 487

LCT tray error: B473/D350
When the bottom plate is lifted, the upper limit sensor does not come on
for 30 sec.
When the bottom plate is lowered, the lower limit sensor does not come
SC510 B
on for 30 sec.
After lift begins, the upper limit sensor does not switch on before the
pick-up solenoid switches on.
The paper end sensor switches on during lift and the upper limit sensor
does not switch on for 2.5 s, and a message prompts user to reset paper.
Tray lift motor harness, disconnected, loose, or defective
Tray lift motor defective
Lift sensor defective or disconnected
Pick-up solenoid defective or disconnected
Paper end sensor defective
Duplex jogger motor error 1
When the jogger fence moves
to the home position, the
SC515 C
jogger fence HP sensor does
not switch on even after the
jogger motor has moved the
jogger fence 153.5 mm.
SM
CÓPIA NÃO CONTROLADA
4-37
CÓPIA NÃO CONTROLADA
Service Call Tables
Jogger fence motor defective or
poor connection
Paper or other obstacle interfering
with operation of the sensors or
motor
Return sensor or HP sensor
defective, dirty, or disconnected
Paper or other obstacle has jammed
mechanism
HP sensor connector disconnected
or defective
HP sensor defective
D014/D015/D078/D079