Ricoh D014 Service Manual page 482

Service Call Tables
SC480 Drum cleaning motor error: K
SC481 Drum cleaning motor error: M
SC482 Drum cleaning motor error: C
SC483 Drum cleaning motor error: Y
The drum cleaning motor failed to
switch on (motor lock), or failed to
reach the required speed within
the prescribed time.
Used toner bottle full
The toner full sensor has
SC484 D
detected that the used toner
bottle is full.
Used toner bottle motor error
The lock signal of the used
SC485 D
toner bottle motor remains
HIGH for more than 600 ms.
Used toner bottle set error
The set sensor of the used
toner bottle remains LOW for
SC487 D
more than 500 ms. (The
sensor goes HIGH when the
bottle is installed correctly.)
D014/D015/D078/D079
CÓPIA NÃO CONTROLADA
4-32
CÓPIA NÃO CONTROLADA
Motor block by physical
obstruction
Motor harness loose, broken,
defective
Motor defective
Remove the used toner bottle
Empty the used toner bottle and
reinstall it
Used toner bottle harness loose,
broken, defective
Used toner bottle motor defective
Used toner bottle not installed
Remove used toner bottle and
reinstall correctly
SM