Ricoh D014 Service Manual page 271

Rev. 03/2008
2. Remove:
Rear upper cover.
Controller box cover
Cover [A] of Slot C (
3. Insert the edge connector of the gigabit Ethernet PCB [B] into its slot on the controller
board.
4. On the other side of the faceplate, fasten the PCB (
5. Attach the cable.
6. With the prongs of the protector plate [D] on both sides of the attached cable, fasten
the protector plate to the controller box face plate (
SM
CÓPIA NÃO CONTROLADA
x1)
1-179
CÓPIA NÃO CONTROLADA
MFP Controller Options
x2).
x1).
D014/D015/D078/D079