Removing The Adf Unit; Removing The Adf Document Cover Open/Close Switch - Ricoh ADF DF7010 Field Service Manual

Chapter 3 1 Exterior

(5) Removing the ADF Unit

1. Remove the ADF.
2. Remove the ADF document cover.
3. Disconnect the three connectors.
4. Remove the two lock-type cable clamps and
take out the cable units from the three cable
clamps.
5. Remove the six screws to remove the ADF unit.

(6) Removing the ADF Document Cover Open/Close Switch

1. Remove the ADF document cover.
2. Remove the two screws to remove the ADF
document cover open/close switch assy.
3. Remove the two connectors of the ADF document
cover close switch and one connector of the ADF
document cover close switch 2.
28
→See (2) above
→See (4) above
→See (4) above
Lock-type cable clamp
Connector
Screw
Screw
ADF Unit
Non-operator's side
ADF document cover
open/close switch assy
Screws
Non-operator's side Connectors
Connector
Cable clamp
Screw
Screw