BY-PASS TRAY
6 November, 2001
3.15.6 BY-PASS TABLE REMOVAL
[A]
[B]
[C]
G065R505.WMF
Note: To remove the entire by-pass tray unit, and not just the table, ☛ 3.6
1. Hinge cover (☛ 3.15.1)
2. Harness [A] (" x 1).
3. Screws [B] (! x 2)
4. By-pass table [C].
CAUTION: To relieve pressure on the spring during removal, depress it as shown
in the illustration.
3-52