6.7
Quick commissioning
The quick commissioning function enables you to set motor parameters, connection macros,
application macros and common parameters of the SINAMICS V20.
Operating sequence
1.
2.
3.
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
Open the quick commissioning Web page by selecting the quick commissioning wizard
icon from either the home page or the navigation sidebar.
Proceed as follows. Quick commissioning will change the following four groups of pa-
rameters at a time.
Change motor parameters (Page 60) settings, if desired.
Note that there are three methods to edit parameter values (see example below for
changing the P0100 and P0304 values):
• Directly select the desired option (example: P0100).
• Move the slider to select the desired value (example: P0304).
• Use the on-screen numeric keypad (example: P0304). Be aware that continuous
clicking on the Delete key (the "x" sign key) on the numeric keypad deletes the
current parameter value.
Commissioning using SINAMICS V20 Smart Access
6.7 Quick commissioning
145