Siemens SINAMICS V20 Operating Instructions Manual page 340

Technical specifications
Standards
European Low Voltage Directive
The SINAMICS V20 product series and SINAMICS V20 Smart Access comply with the requirements
of the Low Voltage Directive 2006/95/EC as amended by Directive 98/68/EEC. The units are certified
for compliance with the following standards:
EN 61800-5-1 — Semiconductor inverters – General requirements and line commutated inverters
European EMC Directive
When installed according to the recommendations described in this manual, the SINAMICS V20 and
SINAMICS V20 Smart Access fulfill all requirements of the EMC Directive as defined by the EMC
Product Standard for Power Drive Systems EN 61800-3.
European R&TTE Directive
SINAMICS V20 Smart Access complies with the following requirements:
Directive 1999/5/EC (R&TTE)
Article 3.1a Health
Article 3.1a Electrical Safety
Article 3.1b EMC
Article 3.2. Radio spectrum
The CE Declaration of Conformity is held on file available to the competent authorities at the following
address:
Siemens AG
Digital Factory
Motion Control
Frauenauracher Straße 80
DE-91056 Erlangen
Germany
The SINAMICS V20 product series has been examined and certified by Underwriters Laboratories
(UL) to standards UL508C/UL61800-5-1) and CSA C22.2 NO-14-10).
The SINAMICS V20 product series complies with the appropriate RCM standard.
The SINAMICS V20 product series complies with the appropriate EAC standard.
340
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006