Inverter Identification; Quick Commissioning - Siemens Sinamics G120 Operating Instructions Manual

Smart access
Hide thumbs Also See for Sinamics G120:
Table of Contents

Advertisement

5.3

Inverter identification

The inverter identification Web page displays detailed information of the currently connected
inverter:
5.4

Quick commissioning

The quick commissioning Web page allows you to set the application class, motor data, I/O
configuration, important parameters, and technological application of the supported inverter.
Note
Commissioning example
The commissioning example shown below is for illustration purposes only. The precise
process depends on the specific type of the connected inverter.
Introduction to the quick commissioning sidebar
When you see the following sidebar on the far left of the quick commissioning Web pages,
you can use the Expand button on the sidebar to display a navigation menu. This menu
shows you the status of individual quick commissioning steps. You can give up your
configuration in the current step and go back to a completed step. After you open a
completed step, the status of all subsequent steps becomes to-be-completed.
Note that the green check mark indicates the completed step, the pencil symbol indicates the
current step, and the circle symbol indicates the to-be-completed step.
SINAMICS G120 Smart Access
Operating Instructions, 04/2018, A5E43332487
Standard Web pages
5.3 Inverter identification
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents