Outline dimensions (mm)
Fixing the shield connection kit to the inverter
If the inverter applies cabinet-panel mounting mode:
Fixing to FSAA/FSAB
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
①
Loosen the PE screw and slide the shielding plate
from below, then retighten the screw to 1.8 Nm (toler-
ance: ± 10%).
②
Fold the cable shield clamp to suit the cable diame-
ter during inverter installation.
Options and spare parts
B.1 Options
377