6.9
Starting motor test run (JOG / HAND)
You use this Web page to start the motor test run in JOG or HAND mode.
Operating sequence
1.
2.
3.
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
Open the JOG Web page by selecting the JOG icon from either the home page or the
navigation sidebar.
Proceed as follows to get the control of the motor.
Run the motor in JOG or HAND mode (default mode: JOG).
Note that if desired, you can also test the motor rotation direction with the correspond-
①
ing button ("
"). The page shows the currently selected rotation direction ("
Commissioning using SINAMICS V20 Smart Access
6.9 Starting motor test run (JOG / HAND)
②
").
153