6.2.1
Overview of the steps
Note
Prerequisite
Before fitting SINAMICS V20 Smart Access to V20, if RS485 communication is present, then
you must set P2010[1] = 12 via the BOP.
1. Fitting SINAMICS V20 Smart Access to the inverter (Page 137)
2. Establishing the wireless network connection (Page 138)
3. Accessing the Web pages (Page 139)
6.2.2
Fitting SINAMICS V20 Smart Access to the inverter
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
Commissioning using SINAMICS V20 Smart Access
6.2 Accessing the SINAMICS V20 Web pages
137