Siemens SINAMICS V20 Operating Instructions Manual page 346

Options and spare parts
B.1 Options
Fitting the Parameter Loader to the inverter
Note
When the inverters you desire to install include FSAA and/or FSAB inverters and you want to
install FSAA and/or FSAB inverters side by side, to make sure that there is sufficient space
to fit the parameter loader to the FSAA/FSAB inverter, install all available FSAA inverters to
the farthest right, followed by all available FSAB inverters and then all other frame sizes.
There are no additional mounting sequence requirements for inverters other than FSAA and
FSAB.
Recommended SD card
Article number: 6SL3054-4AG00-2AA0
Using memory cards from other manufacturers
SD card requirement:
● Supported file format: FAT16 and FAT 32
● Maximum card capacity: 32 GB
● Minimum card space for parameter transfer: 8 KB
Note
You use memory cards from other manufacturers at your own risk. Depending on the
card manufacturer, not all functions are supported (for example, download).
346
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006