Siemens SINAMICS V20 Operating Instructions Manual page 309

Parameter Function
Dependency: P2802[11] assigns the Divider to the processing sequence.
r2884 CO: DIV 2
Result of Divider 2.
Dependency: See P2883
P2885[0...1] CI: CMP 1
Defines inputs of Comparator 1, output is r2886.
Index: See P2869
Dependency: P2802[12] assigns the Comparator to the processing sequence.
r2886.0 BO: CMP 1
Displays result bit of Comparator 1. See r2811 for the bit field description.
Dependency: See P2885
P2887[0...1] CI: CMP 2
Defines inputs of Comparator 2, output is r2888.
Index: See P2869
Dependency: P2802[13] assigns the Comparator to the processing sequence.
r2888.0 BO: CMP 2
Displays result bit of Comparator 2. See r2811 for the bit field description.
Dependency: See P2887
P2889 CO: Fixed setpoint 1 in
[%]
Fixed percent setting 1.
P2890 CO: Fixed setpoint 2 in
[%]
Fixed percent setting 2.
P2940 BI: Release wobble
function
Defines the source to release the wobble function.
P2945 Wobble signal frequen-
cy [Hz]
Sets the frequency of the wobble signal.
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
Range Factory
default
- -
0 - 0
4294967295
- -
0 - 0
4294967295
- -
-200.00 - 0.00
200.00
-200.00 - 0.00
200.00
0 - 0.0
4294967295
0.001 - 1.000
10.000
Can be Scaling Data
changed set
- - -
U, T 4000H -
- - -
U, T 4000H -
- - -
U, T - -
U, T - -
T - -
T - -
Parameter list
8.2 Parameter list
Data Acc.
type Level
Float 3
U32 3
Float 3
U32 3
U16 3
Float 3
Float 3
U32 2
Float 2
309