B Options And Spare Parts; Options; Parameter Loader - Siemens SINAMICS V20 Operating Instructions Manual

Options and spare parts
Note
Repair and replacement of equipment
Any defective parts or components must be replaced using parts contained in the relevant
lists of spare parts or options.
Disconnect the power supply before opening the equipment for access.
B.1

Options

For more information about recommended cable cross-sections and screw tightening
torques, see the table "Recommended cable cross-sections and screw tightening torques" in
Section "Terminal description (Page 38)".
Note
In order to gain access to the expansion port to fit the Parameter Loader or Bop Interface
Module, remove the detachable transparent cover gently using just finger pressure. It is
recommended to keep the cover in a safe place and refit it when the expansion port is not in
use.
B.1.1

Parameter Loader

Article number: 6SL3255-0VE00-0UA1
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
B
343