Siemens SINAMICS V20 Operating Instructions Manual page 189

Parameter Function
r0038 CO: Filtered power
factor
Displays the filtered power factor.
r0039 CO: Energy con-
sumpt. meter [kWh]
Displays electrical energy used by inverter since display was last reset (see P0040 - reset energy con-
sumption meter).
Dependency: Value is reset when P0040 = 1 (reset energy consumption meter).
P0040 Reset energy con-
sumpt. and energy
saved meter
Resets value of r0039 (energy consumption meter) and r0043 (energy saved meter) to zero.
0
1
P0042[0...1] Energy saving scaling
Scales the calculated energy saved value
Index: [0]
[1]
r0043[0...2] Energy saved [kWh]
Displays calculated energy saved
Index: [0]
[1]
[2]
r0050 CO / BO: Active com-
mand data set
Displays currently active command data set.
0
1
2
Note: See P0810
r0051[0...1] CO: Active inverter
data set (DDS)
Displays currently selected and active inverter data set (DDS).
0
1
2
Index: [0]
[1]
Note: See P0820
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
Range Factory
default
- -
- -
0 - 1 0
No reset
Reset r0039 to 0
0.000 - 0.000
100.00
Factor for kWh to currency conversion
Factor for kWh to CO2 conversion
- -
Energy saving in kWh
Energy saving in currency
Energy saving in CO2
- -
Command data set 0 (CDS)
Command data set 1 (CDS)
Command data set 2 (CDS)
- -
Inverter data set 0 (DDS0)
Inverter data set 1 (DDS1)
Inverter data set 2 (DDS2)
Selected inverter data set
Active inverter data set
Can be Scaling
changed
- -
- -
T -
T -
- -
- -
- -
Parameter list
8.2 Parameter list
Data Data Acc.
set type Level
- Float 3
- Float 2
- U16 2
- Float 2
- Float 2
- U16 2
- U16 2
189