Basic upgrading
1.
2.
3.
4.
5.
6.
7.
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
Download the target upgrade file (*.bin file) from the following Web site to your local
drive (recommended on PC):
https://support.industry.siemens.com/cs/ww/en/ps/13208
Power off SINAMICS V20 Smart Access by sliding its power switch to "OFF". Keep the
reset button pressed and then slide the power switch to "ON".
Open the following Web site specific for basic upgrading:
http://192.168.1.1/factory/basicupgrade.html
Proceed as follows:
Restart SINAMICS V20 Smart Access.
Clear the Web browser cache.
Refresh your Web application.
Commissioning using SINAMICS V20 Smart Access
6.13 Upgrading Web application and firmware versions
163