Siemens SINAMICS V20 Operating Instructions Manual page 350

Options and spare parts
B.1 Options
Inverter status icons
Screen display
The display of the external BOP is identical to the built-in BOP, except that the external BOP
has a commissioning icon
mode.
On inverter power-up, the inverter-connected external BOP first displays "BOP.20" (BOP for
the SINAMICS V20) and then the firmware version of the BOP. After that it detects and
displays the baudrate and the USS communication address of the inverter automatically.
See the following table for settable baudrate and address values. To change the baudrate,
set P2010[0]. To change the USS communication address, set P2011[0].
Baudrate
(bps)
9600
19200
38400
57600
76800
93750
115200
350
Pressing the button:
Button functions the same as the
Turning clockwise:
Button functions the same as the
functions the same as long press of the
Turning counter-clockwise:
Button functions the same as the
functions the same as long press of the
Button functions the same as the
These icons have the same meaning as the corresponding icons on the built-in
BOP.
Commissioning icon. The inverter is in commissioning mode (P0010 = 1).
which is used to indicate that the inverter is in commissioning
Communication address
0 ... 31
0 ... 31
0 ... 31
0 ... 31
0 ... 31
0 ... 31
0 ... 31
button on the built-in BOP.
button on the built-in BOP. Fast turning
button on the built-in BOP.
button on the built-in BOP. Fast turning
button on the built-in BOP.
+ buttons on the built-in BOP.
Display example
Operating Instructions, 11/2016, A5E34559884-006
SINAMICS V20 Inverter