Siemens SINAMICS V20 Operating Instructions Manual page 148

Commissioning using SINAMICS V20 Smart Access
6.7 Quick commissioning
7.
8.
148
Note:
If you select the check boxes of certain common parameters and edit their values, then
the parameter settings here are saved on the Web page; if you deselect the check
boxes of the common parameters, then their values displayed on the application macro
Web page are saved on the Web page.
Confirm to start writing parameter settings to the inverter. SINAMICS V20 Smart Ac-
cess then starts the automatic optimization process.
Confirm completion of the quick commissioning when the following window appears. If
the Web page indicates that the optimization fails, you can select to try optimization
again.
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006