Siemens SINAMICS V20 Operating Instructions Manual page 197

Parameter Function
Note: This parameter selects inverter application for FSE only. The parameter value is not reset by the factory
setting (see P0970).
r0206 Rated inverter power
[kW] / [hp]
Displays nominal rated motor power from inverter.
Dependency: Value is displayed in [kW] or [hp] depending on setting for P0100 (operation for Europe / North America).
r0207[0...2] Rated inverter current
[A]
Displays rated inverter current.
Index: [0]
[1]
[2]
Note: The rated high overload (HO) current r0207[2] values correspond to suitable 4-pole Siemens standard
motors (IEC) for the selected load cycle (see diagram). r0207[2] is the default value of P0305 in associa-
tion with the HO application (load cycle).
r0208 Rated inverter voltage
[V]
Displays nominal AC supply voltage of inverter.
Note: r0208 = 230: 200 V to 240 V (tolerance: -10% to +10%)
r0208 = 400: 380 V to 480 V (tolerance: -15% to +10%)
SINAMICS V20 Inverter
Operating Instructions, 11/2016, A5E34559884-006
Range Factory
default
- -
- -
Rated inverter current
Rated LO current
Rated HO current
- -
Can be Scaling
changed
- -
- -
- -
Parameter list
8.2 Parameter list
Data Data Acc.
set type Level
- Float 2
- Float 2
- U32 2
197