Td Sensor - Ricoh B064 Service Manual

3.7.4 TD SENSOR

Development unit (☛ 3.6.1)
[A]: TD sensor (! x1)
• Before installing a new TD sensor, clean the TD sensor port [B].
• After replacing the TD sensor, do the following SPs
SP2801 TD Sensor Initial Setting
SP2962 Adjustment of Drum Conditions (only if SP3901 – Auto Process
Control – is on).
3.7.5 TONER END SENSOR
Development unit (☛ 3.6.1)
[A]: Toner hopper (! x2)
[B]: Toner end sensor (! x2)
• Remove the screws carefully to avoid stripping the holes.
• Before installing a new toner end sensor, clean the toner end sensor port
[C].
SM
[B]
B064R451.WMF
[B]
[C]
B064R450.WMF
3-49
DEVELOPMENT UNIT
[A]
[A]
B064/B065