Placement Of Cis Unit Position For Transportation (Function Mode 06); Adf Performance Test (Function Mode 08) - Ricoh G157 Service Manual

MAINTENANCE MODE

Placement of CIS Unit Position for Transportation (Function mode 06)

This function moves the CIS unit into position for transportation. This is at the right
end. You must perform this function before packing and shipping the machine.
NOTE: Please instruct end users to perform this function, if possible, before
packing and shipping the machine to a sales agent or a service dealer for
repair.
1. Enter the "Maintenance" mode.
2. Press "0" then "6" keys. The CIS unit moves to the position for transportation
located at the right end.
3. "MAINTENANCE 06" is displayed until the CIS unit is placed in position.
4. "SCAN LOCKED" appears on the LCD when the CIS unit is placed in the
transportation position.
5. Open the document cover, and lock the scanner lock lever at the rear left of the
scanner unit.
6. "SCAN LOCKED" appears when the scanner lock lever is locked.
7. Press the "Stop/Exit" key to terminate this operation.
8. The machine returns to the initial display of the maintenance mode.

ADF Performance Test (Function mode 08)

The machine counts the documents fed by the automatic document feeder (ADF)
and displays the count on the LCD to check the ADF performance.
1. Set some originals. (Allowable up to the ADF capacity.)
2. "DOC. READY" appears on the LCD.
3. Press the "0" and "8" keys in this order.
4. While counting the documents, the machine feeds them in and out, displaying
the current count on the LCD as shown below. "P.xx" indicates the current
count.
ADF CHECK
5. Press the "Stop/Exit" key to return the machine to the initial display of the
maintenance mode.
G157
P.xx
5-24 SM