Series Number And Series Id As Manufactured In The U.s - Allen-Bradley CENTERLINE Instruction Manual

1-6 General Information
Series Number and Series
ID as Manufactured in the
U.S.
Series Scope
Letter
(1) — Original design
A
All Changed terminal blocks
(1)
B
All Elimination of external mounting channels
(1)
C
(1) All Reverse fed 2192's and 2193's
D
(1) All All redesign gasketing
E
(1) All Modified top horizontal wireway pan to accept units with handle interlock in topmost space factor
F
(1) 42K 42K bracing-incorporates new bus support & cover
G
(1) 65K 65K bracing-incorporates new bus support & cover
G
H All New hinge design
J All Changed handle, operating mechanism and circuit breaker to Westinghouse series
K All Changed to new unit grounding system 5.90
L All Changed to new 600A - 1200A circuit breaker operating mechanism
M All Changed to serpentine DeviceNet cabling system
(1)
Replacement and renewal parts are no longer supported. Consult MCC Technical Support.
Publication 2100-IN012B-EN-P - April 2005
Read Tables 1.A through 1.D BEFORE adding new
ATTENTION
sections or units to an existing CENTERLINE Motor
Control Center.
Table 1.A Sections
Sections
Description of Change Date Implemented
in U.S.
February 1971
November 1976
June 1979
April 1981
October 1982
October 1983
January 1985
July 1985
January 1986
October 1986
May 1990
February 1996
May 2001