Fuel Level Sensor - Subaru Legacy 2005 Service Manual

Fuel Level Sensor

FUEL INJECTION (FUEL SYSTEM)
23.Fuel Level Sensor
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
• Reduce the fuel in the fuel tank to less than 3/
4 beforehand. Be careful that fuel may spill
when the fuel is more than 3/4.
NOTE:
Fuel level sensor is built in fuel pump assembly.
1) Remove the fuel pump assembly. <Ref. to
FU(H4SO 2.0)-47, REMOVAL, Fuel Pump.>
2) Disconnect the connector from fuel pump brack-
et.
FU-01142
3) Remove the fuel level sensor.
B: INSTALLATION
Install in the reverse order of removal.
FU(H4SO 2.0)-49