FUEL INJECTION (FUEL SYSTEMS)
20.Fuel Level Sensor
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
NOTE:
Fuel level sensor is built in fuel pump assembly.
1) Remove fuel pump assembly. <Ref. to FU(SO-
HCw/oOBD)-54, REMOVAL, Fuel Pump.>
2) Disconnect connector from fuel pump bracket.
3) Remove bolt which installs fuel level sensor on
mounting bracket.
FUEL LEVEL SENSOR
B: INSTALLATION
Install in the reverse order of removal.
EN0559
EN0560
FU(SOHCw/oOBD)-56