FUEL LEVEL SENSOR
FUEL INJECTION (FUEL SYSTEMS)
26.Fuel Level Sensor
A: REMOVAL
WARNING:
Place "NO FIRE" signs near the working area.
Be careful not to spill fuel on the floor.
NOTE:
Fuel level sensor is built in fuel pump assembly.
1) Remove the fuel pump assembly. <Ref. to
FU(D0HC TURBO)-60, REMOVAL, Fuel Pump.>
2) Disconnect the connector from the fuel pump
bracket.
3) Remove the bolt which installs the fuel level sen-
sor on mounting bracket.
B: INSTALLATION
Install in the reverse order of removal.
FU(D0HC TURBO)-62