Data Transfer Speed; Digit Suppression In Call Detail Reports - Siemens HiPath 1100 Series Programming Manual

Call Detail Report Manager
Step by Step
104

Data Transfer Speed

The system can be connected to a PC or printer with a
V.24 adapter to display or print the call detail report
( page 102). The communication speed can be set to
ensure proper data transfer.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 0
... Enter the code for the transmission (Baud) rate:
1 9
= 9600 baud
1
= 14400 baud
2
= 19200 baud
3
= 38400 baud
4
= 56000 baud (default)
5
= 57600 baud
6
= 115200 baud
7
= 128000 baud
8
= 256000 baud
9
Initial state for Programming Mode.
Digit Suppression in Call Detail Re-
ports
The last digits dialed in an external call can be
suppressed in the data output. These digits are
replaced by "?."
By default, no digit is suppressed.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 1
... Select the number of digits to be suppressed.
0 9
Initial state for Programming Mode.