Ticket Cost Code; Data Transfer Speed - Siemens HiPath 1100 Programming Manual

Step by Step
*

Ticket Cost Code

External calls can be assigned Cost Codes which provide
more control over telephony costs (see Functions Used
During a Call - Cost Code, in the Manual do Usuário). This
information may be presented on the billing ticket.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 9 5
ou
# Activate/Deactivate sending Cost Code for call detail re-
port:
= To activate
*
= To deactivate (default)
#
Initial state for Programming Mode.

Data Transfer Speed

The system can be connected to a PC or printer with a
V.24 adapter to display or print the call detail report
( page 122). The communication speed can be set to
ensure proper data transfer.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 2 0
...
1 9 Enter the code for the transmission (Baud) rate:
= 9600 baud
1
2 = 14400 baud
= 19200 baud (default)
3
= 38400 baud
4
5 = 56000 baud
= 57600 baud
6
= 115200 baud
7
8 = 128000 baud
9 = 256000 baud
Initial state for Programming Mode.
Call Detail Report Manager
125