Available Software - Texas Instruments CC253x User Manual

This chapter presents the various available software solutions relevant to the CC253x, CC2540, and
CC2541 family. They are all available free of charge on the TI Web site at
TI LPRF devices.
As shown in Table 0-1
different flash and RAM sizes; hence, they are not equally well suited for the different software offerings in
the sections below. For example, a user designing a ZigBee device should use the CC2530F256, as the
Z-Stack™ requires in most cases more than 128 KB of flash and needs the 8-KB RAM.
...........................................................................................................................
Topic
27.1 SmartRF™ Software for Evaluation (www.ti.com/smartrfstudio)
27.2 RemoTI™ Network Protocol (www.ti.com/remoti)
27.3 SimpliciTI™ Network Protocol (www.ti.com/simpliciti)
27.4 TIMAC Software (www.ti.com/timac)
27.5 Z-Stack™ Software (www.ti.com/z-stack)
27.6 BLE Stack Software
SWRU191F – April 2009 – Revised April 2014
Submit Documentation Feedback
in the Preface, the members of the CC253x, CC2540, and CC2541 family have
...................................................................
..........................................................................................
Copyright © 2009–2014, Texas Instruments Incorporated
SWRU191F – April 2009 – Revised April 2014

Available Software

www.ti.com/lprf
.............................
.................................................
..........................................
.............................................................
Chapter 27
when used with
Page
344
344
345
345
346
346
343
Available Software