Software
To activate the GUI, hit the INACTIVE red button to change to ACTIVE green button. The GUI is now in
operation. The user can configure the device first, then activate the PPC3. Once the PPC3 is activated, some
controls are greyed out until the ACTIVE button is de-activated.
3.3.1 Software Overview
The TAx5x12 EVM control software allows for the configuration of the TAx5x12 EVM-PDK. The application is
organized into three main views: Configuration, End System Integration and Register Map. These views are
detailed in this section. Some controls in these tabs are grayed out when the tabs are not applicable to the
selected device variant.
3.3.2 Configuration View
The configuration view, shown in
TAx5x12 EVM. This view has tabs for each of the device configuration and is described in this section.
18
TAx5x12EVM-K Evaluation Module
Figure 3-8. Activate GUI
Figure
3-9, contains all of the settings used to configure and program the
Figure 3-9. Configuration View
Copyright © 2024 Texas Instruments Incorporated
SLAU902A – SEPTEMBER 2023 – REVISED JANUARY 2024
Submit Document Feedback
www.ti.com