Timer 3 and Timer 4 are two 8-bit timers. Each timer has two independent capture-or-compare channels,
each using one I/O pin per channel.
Features of Timer 3 and Timer 4 are as follows:
•
Two capture-or-compare channels
•
Set, clear, or toggle output compare
•
Clock prescaler for divide by 1, 2, 4, 8, 16, 32, 64, 128
•
Interrupt request generated on each capture or compare and terminal-count event
•
DMA trigger function
...........................................................................................................................
Topic
10.1
8-Bit Timer Counter
10.2
Timer 3 and Timer 4 Mode Control
10.3
Channel Mode Control
10.4
Input Capture Mode
10.5
Output Compare Mode
10.6
Timer 3 and Timer 4 Interrupts
10.7
Timer 3 and Timer 4 DMA Triggers
10.8
Timer 3 and Timer 4 Registers
120
Timer 3 and Timer 4 (8-Bit Timers)
Timer 3 and Timer 4 (8-Bit Timers)
..........................................................................................
......................................................................
......................................................................................
..........................................................................................
......................................................................................
...........................................................................
.....................................................................
...........................................................................
Copyright © 2009–2014, Texas Instruments Incorporated
Chapter 10
SWRU191F – April 2009 – Revised April 2014
SWRU191F – April 2009 – Revised April 2014
Submit Documentation Feedback
Page
121
121
121
122
122
122
123
123