Figure 3–4
2. Connect the terminal's power cable to an AC outlet.
3. Set the terminal to receive:
4 At 9600 baud
4 An 8-bit signal with no parity and 1 stop bit
See the documentation accompanying your terminal for more information.
What Next
You can now issue system commands and view system messages. Continue with
your installation or diagnostic procedure as needed.
How to Configure a Local Graphics
Console
Before You Begin
If your server is configured without a local graphics console, you need to install one
in order to install the system and to run diagnostic tests. For background
information, see "About Setting Up a Console" on page 49.
51
System Setup