How To Remove A Memory Module - Sun Microsystems Enterprise 250 Owner's Manual

How to Remove a Memory Module

Before You Begin
Complete these tasks:
4 "How to Power Off the System" on page 55
4 "How to Remove the Side Access Panel" on page 60
4 "How to Avoid Electrostatic Discharge" on page 64
Caution -
Dual inline memory modules (DIMMs) are made of electronic
components that are extremely sensitive to static electricity. Static from your clothes
or work environment can destroy the modules. Do not remove any DIMM from its
antistatic packaging until you are ready to install it on the main logic board. Handle
the modules only by their edges. Do not touch the components or any metal parts.
Always wear a grounding strap when you handle the modules.
What to Do
1. Locate the DIMM module you want to remove on the main logic board.
See "About Memory" on page 76.
2. Push the ejection lever away from the memory module and eject it
from the socket.
Removing and Installing Main Logic Board Components
105