Power Cord Connection; Lithium Battery - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

Power Cord Connection

Caution – Sun products are designed to work
with single-phase power systems having a
grounded neutral conductor. To reduce the
risk of electric shock, do not plug Sun
products into any other type of power system.
Contact your facilities manager or a qualified
electrician if you are not sure what type of
power is supplied to your building.
Caution – Not all power cords have the same
current ratings. Household extension cords do
not have overload protection and are not
meant for use with computer systems. Do not
use household extension cords with your Sun
product.
Caution – Your Sun product is shipped with a
grounding type (three-wire) power cord. To
reduce the risk of electric shock, always plug
the cord into a grounded power outlet.
Caution – In order to remove all power from
the system, disconnect all power cords.
The following caution applies only to devices with a Standby power switch:
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the
power cord into a grounded power outlet that
is nearby the system and is readily accessible.
Do not connect the power cord when the
power supply has been removed from the
system chassis.

Lithium Battery

Caution – The Sun Fire V490 system PCI riser
board and SC card contain lithium batteries.
Batteries are not customer replaceable parts.
They may explode if mishandled. Do not
dispose of the battery in fire. Do not
disassemble it or attempt to recharge it.
Appendix F Safety Precautions 229