To View And Set OpenBoot Configuration
Variables
1. Halt the server to reach the ok prompt.
To display the current values of all OpenBoot configuration variables, use the
printenv command.
The following example shows a short excerpt of this command's output.
ok printenv
Variable Name
diag-level
diag-switch?
To set or change the value of an OpenBoot configuration variable, use the setenv
command:
ok setenv diag-level max
diag-level =
To set OpenBoot configuration variables that accept multiple keywords, separate
keywords with a space.
Value
min
false
max
Default Value
min
false
Chapter 6 Diagnostics
77