Displaying Aggregate Interface Information - HP 1920 Gigabit Ethernet Switch Series User Manual

Figure 188 Creating a link aggregation group
3. Configure a link aggregation group as described in
4. Click Apply.
Table 64 Configuration items
Item
Enter Link Aggregation
Interface ID
Specify Interface Type
Select port(s) for the link
aggregation interface

Displaying aggregate interface information

1. From the navigation tree, select Network > Link Aggregation.
The default Summary tab appears. The list on the upper part of the page displays information
about all the aggregate interfaces.
Description
Assign an ID to the link aggregation group to be created.
You can view the result in the Summary area at the bottom of the page.
Set the type of the link aggregation interface to be created:
•
Static—LACP is disabled.
•
Dynamic—LACP is enabled.
Select one or multiple ports to be assigned to the link aggregation group from
the chassis front panel.
You can view the result in the Summary area at the bottom of the page.
209
Table 64.