Displaying Information Of An Aggregate Interface; Setting Lacp Priority - HP V1910 User Manual

Displaying information of an aggregate interface

Select Network  Link Aggregation from the navigation tree. The Summary tab is displayed by default, as
shown in a.
Display information of an aggregate interface
a.
Fields on the Summary tab
2.
Field
Aggregation interface
Link Type
Partner ID
Selected Ports
Standby Ports
Return to Static aggregation group configuration task
Return to Dynamic aggregation group configuration task

Setting LACP priority

Select Network  LACP from the navigation tree, and click the Setup tab to enter the page shown in a.
Description
Type and ID of the aggregate interface.
Bridge-Aggregation indicates a Layer 2 aggregate interface.
Type of the aggregate interface, which can be static or dynamic.
ID of the remote device, including its LACP priority and MAC address.
Number of Selected ports in each link aggregation group. Only Selected ports
can transmit and receive user data.
Number of Unselected ports in each link aggregation group. Unselected ports
cannot transmit or receive user data.
211
list.
list.