Configuring The Aging Timer For Dynamic Mac Address Entries - HP 6125XLG Configuration Manual

information about VSI, see MPLS Configuration Guide. For information about S-channel and EVB, see
EVB Configuration Guide.
Disabling MAC address learning on an interface
With global MAC address learning enabled, you can disable MAC address learning on a single
interface.
To disable MAC address learning on an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Disable MAC address
learning on the interface.
Disabling MAC address learning on a VLAN
With global MAC address learning enabled, you can also disable MAC address learning on a
per-VLAN basis.
To disable MAC address learning on a VLAN:
Step
1. Enter system view.
2. Enable global MAC address
learning.
3. Enter VLAN view.
4. Disable MAC address
learning on the VLAN.

Configuring the aging timer for dynamic MAC address entries

The MAC address table uses an aging timer for dynamic MAC address entries for security and efficient
use of table space. If a dynamic MAC address entry has failed to update before the aging timer expires,
Command
system-view
•
Enter Layer 2 Ethernet interface
view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate interface
view:
interface bridge-aggregation
interface-number
•
Enter S-channel interface view:
interface s-channel
interface-number.channel-id
•
Enter S-channel aggregate
interface view:
interface schannel-aggregation
interface-number:channel-id
undo mac-address mac-learning
enable
Command
system-view
mac-address mac-learning enable
vlan vlan-id
undo mac-address mac-learning
enable
24
Remarks
N/A
N/A
By default, MAC address
learning on the interface is
enabled.
Remarks
N/A
By default, global MAC address
learning is enabled.
N/A
By default, MAC address learning
on the VLAN is enabled.