Setting the aging time of MAC address entries
Select Network > MAC from the navigation tree, and click the Setup tab to enter the page shown in
Figure 159 Set the aging time for MAC address entries
Table 67 Configuration items of setting the aging time for a MAC address entry
MAC address configuration example
Use the web-based NMS to configure the MAC address table of the device. It is required to add a static
MAC address 00e0-fc35-dc71 under GigabitEthernet 1/0/1 in VLAN 1.
Set the type of the MAC address entry:
Static—Static MAC address entries that never age out.
Dynamic—Dynamic MAC address entries that will age out.
Blackhole—Blackhole MAC address entries that never age out.
The tab displays the following types of the MAC address entries:
Config static—Static MAC address entries manually configured.
Config dynamic—Dynamic MAC address entries manually configured.
Blackhole—Blackhole MAC address entries.
Learned—Dynamic MAC address entries learned by the device.
Other—Other types of MAC address entries.
Set the ID of the VLAN to which the MAC address belongs.
Set the port to which the MAC address belongs.
Specify that the MAC address entry never ages out.
Set the aging time for the MAC address entry.