Configuring An Snmp View; Creating An Snmp View - HP FlexNetwork NJ5000 User Manual

Configuring an SNMP view

Creating an SNMP view

Select Device > SNMP from the navigation tree.
1.
Click the View tab.
2.
The View tab appears.
Figure 85 View tab
Click Add.
3.
The Add View window appears.
Figure 86 Creating an SNMP view (1)
Type the view name.
4.
Click Apply.
5.
The page in
Configure the parameters as described in
6.
Click Add to add the rule into the list box at the lower part of the page.
7.
Repeat steps 6 and 7 to add more rules for the SNMP view.
8.
Click Apply.
9.
To cancel the view, click Cancel.
Figure 87 appears.
Table 40.
89