Copying In The Specified Paper Size (Auto Mode) - Xerox Wide Format 6705 System User Manual

2.3 Copying in the Specified Paper Size (Auto
Mode)
Auto Mode is a feature that allows you to pre-configure an output paper size for each document size using a matrix.
The feature automatically reduces/enlarges images based on this configuration when copying.
The following describes an example of how to insert an A2 standard-size document in the portrait orientation, and to
make its enlarged copies (141.4%) on A1 paper (A1 roll paper in the portrait orientation) (The value surrounded
with a square is the set value).
Steps
St
1.
On the menu screen, press [Copy].
2.
Select the [Auto Mode] check box.
3.
On the matrix, select [A2] for [Original Size] and [A1] for
[Paper Supply].
If the orientation of your original does not

Note
match that of the paper loaded, for example,
when [Original Orientation] is set to [Standard
Portrait] though [Paper Orientation] is set to
[Landscape], the image will be printed on the
paper with the image orientation rotated
according to the settings specified in [Auto
Mode Rotate Direction] under [System
Settings]. For information on how to set the
function, refer to "Auto Mode Rotate Direction"
(p. 307).
4.
Set other features as necessary.
5.
Enter the number of copies using the numeric keypad.
6.
Load the document.
A2
Enlarging
Document

2.3 Copying in the Specified Paper Size (Auto Mode)

A1
Copied output
2
83