Checking And Unloading The Stitcher/Stacker Tray - Xerox DocuPrint 4890 Manual

Output trays

Checking and unloading the stitcher/stacker tray

2-2
2
1. Scuffer arm
2. Tray Full indicators
NOTE: When both trays are full, you must empty at least one
tray before you can resume printing.
NOTE: Your service representative can set up your printer so
that printing continues automatically after a dual stacker output
tray is unloaded and replaced.
An electronic counter in the stitcher/stacker keeps track of the
number of sheets printed and the number of stapled sets
produced.
When a stacker output tray (bin) is full, printing stops and a
message appears on the printer console that the output tray is
full.
• Printing stops and a message appears on the printer control
console that the output tray is full.
• The Attention light shines steadily.
1
Guide to Performing Routine Maintenance