Rear Wheel Removal - Honda GL1100 interstate Owner's Manual

REAR WHEEL REMOVAL
l. Place the motorcycle on its center
stand.
2. Lift tt'e licence plate up. Remove the
three bolts ( I ) and remove the sub rear
fender (2).
3. Remove the rear bumper (3) by re-
moving the four bolts (4).
4. Suppod the rear wheel so it will not
drop when the shock absorbers are dis-
connected.
5. Remove the axle nut (5).
6. Remove the axle holding bolt (6) and
brake disc cover.
7. Remove the lower shock absoroer nur
(7: dght side) and bolt (8: left side).
8. Raise the rear wheel so the axle will
clear the muffler.
9. Pull out the lear axle (9).
CAUTION :
* Support the caliper ossembly and swing-
arm before remoting the rear axle so
that it does not hang from the brake
hde- Do not twist the bruke hose
(l) Bolts
(2) Sub rear fender
(3) Rear bumper
(4) Bolts