Rear Wheel Removal - Honda Goldwing GL1100 Interstate 1981 Owner's Manual

REAR WHEEL REMOV AL
I. Place the motorcycle on its center
stand.
2. Support the rear wheel so
it will
not
drop when the shock absorbers are dis-
connected.
3. Remove the colter pin
(l)
from the
axle and remove the axle nut (2).
4. Remove the axle holding bolt
(3).
S. Remove the lower shock absorber nut
(right side) and bolt (4: left side).
6. Raise the rear wheel so the axle will
clear the muffler.
~
(1)
Cotter pin
58
(2) Axle nut
7. Pull out the rear axle (5).
CAUTION:
,. Support the caliper assembly and
arm before removing the rear ax
that it does not hang from the
hose. Do not twist the brake hose.
8. Remove three
final
drive case
DUts
9. Move the wheel backward.
10. Separate the final drive case from
wheel.
(3) Axle holding bolt
(4) Lower shock absorber bolt
(5) Rear axle
(6) Final drive case nuts