Drive Clutch Removal - Club Car FE350 2005 Maintenance Service Supplement

17
TORQUE CONVERTER
DRIVE CLUTCH
See General Warning, Section 10, Page 10-1.
ý
CAUTION
• Be very careful when handling the clutches. A clutch that has been dropped will not be
properly balanced. If either clutch is dropped, assume that it is damaged and replace it.

DRIVE CLUTCH REMOVAL

1. Remove the drive belt as instructed. See Drive Belt Removal on page 17-3.
2. Loosen the starter/generator mounting and adjusting hardware and then remove the starter belt. See
WARNING "Moving parts! Do not..." in General Warning, Section 10, Page 10-2.
Use Club Car clutch holder
while tightening or loosening drive
clutch retaining bolt.
CLUTCH HOLDER
THREE BOSSES
IN GRAY
Figure 17-3 Loosen Retaining Bolt
Page 17-4 2005 FE350 Gasoline Vehicle Maintenance and Service Supplement
DRIVE CLUTCH
RETAINING BOLT
Hook clutch holder
on boss of pully
located behind drive
clutch...push down
on adjacent
boss with holder.
VEHICLE BODY
REMOVED FOR
CLARITY
DRIVEN
CLUTCH
DRIVE CLUTCH
Insert drive clutch
puller into drive
clutch, then tighten
puller to remove
hub.
DRIVE CLUTCH PULLER
Figure 17-4 Drive Clutch Removal
Drive Clutch
(CCI P/N 1014496)