Club Car FE350 2005 Maintenance Service Supplement page 186

17
TORQUE CONVERTER
Remove these
items from ribs:
10-24 MACHINE
SCREW
FLAT WASHER
DRIVE BUTTON
DRIVE BUTTON
TAKE UP SPRING
Figure 17-8 Drive Button Mounting
5. Remove the clutch weights (Figure 17-9, Page 17-8):
5.1. Remove the screws and flat washers attaching the weights as shown (Figure 17-9, Page 17-8).
5.2. Pull the weight assemblies, with pins, from the clutch.
5.3. Before removing, note the orientations of the wave washer and of the primary and secondary
weights to one another (Figures 17-10 and 17-11, Page 17-8). Remove the plastic washers,
weights and wave washer from the pin. Retain all parts.
PRIMARY
WEIGHT
PIN
Figure 17-10 Install Pin and Washer
Page 17-8 2005 FE350 Gasoline Vehicle Maintenance and Service Supplement
WEIGHT
SLOTS IN HUB
RIBS
CASTING
WAVE
WASHER
Figure 17-11 Install Secondary Weight
1/4-20 BOLT
FLAT WASHER
WEIGHT
Figure 17-9 Weight Position
SECONDARY
WEIGHT
PIN
Drive Clutch