Fuel Level Sending Unit; Rpm Limiter - Club Car FE350 2005 Maintenance Service Supplement

12
ELECTRICAL COMPONENTS

FUEL LEVEL SENDING UNIT

See General Warning, Section 10, Page 10-1.
The fuel level sending unit is an integral part of the fuel tank and should never be removed. Thoroughly test
the fuel level sending unit before replacing the fuel tank.
Testing the Fuel Level Sending Unit
See Test Procedure 26, Section 11, Page 11-38.

RPM LIMITER

See General Warning, Section 10, Page 10-1.
Testing the RPM Limiter
See Test Procedure 15, Section 11, Page 11-28.
RPM Limiter Removal
1. Disconnect the battery cables as instructed. See WARNING "To avoid unintentionally starting..." in
General Warning, Section 10, Page 10-1.
2. Disconnect the white/black wire from the black wire at the bullet connector located near the RPM limiter
(Figure 12-25, Page 12-24).
3. Disconnect the other black wire at the other bullet connector near the RPM limiter.
4. Remove the flange-head bolts from the RPM limiter band and remove the RPM limiter and damper
(Figure 12-25, Page 12-24).
Page 12-24 2005 FE350 Gasoline Vehicle Maintenance and Service Supplement
DAMPER
RPM LIMITER
BROWN WIRE
BLACK WIRE
Figure 12-25 RPM Limiter
BLACK WIRE
TO IGNITION COIL
FEMALE BULLET
TERMINAL
Fuel Level Sending Unit
FEMALE BULLET
TERMINAL
WHITE/BLACK
KILL CIRCUIT WIRE