Club Car FE350 2005 Maintenance Service Supplement page 174

16
UNITIZED TRANSAXLE
Unitized Transaxle Installation, Continued:
29. Connect the impulse line to the fuel pump and secure it with the hose clamp (Figure 16-50, Page 16-20).
30. Connect air intake hose to carburetor and secure hose clamp (Figure 16-51, Page 16-20).
IMPULSE LINE
Figure 16-50 Impulse Line
31. Connect carburetor vent tube to carburetor and secure with hose clamp (Figure 16-52, Page 16-20).
Figure 16-52 Carburetor Tube
32. Install transaxle drain plug and tighten to 21 ft-lb (28.5 N·m).
33. Fill transaxle with 27 oz. (0.8 liter) 80-90 WT. API class GL-3 or 80-90 WT. AGMA class EP gear lube.
Install and tighten the level indicator hole plug to 21 ft-lb (28.5 N·m).
34. Ensure that all wiring is secured properly. See following WARNING.
Page 16-20 2005 FE350 Gasoline Vehicle Maintenance and Service Supplement
Unitized Transaxle Installation
Figure 16-51 Air Intake Hose