Torque Specifications; Adjustments And Settings - Club Car FE350 2005 Maintenance Service Supplement

FE350 ENGINE

TORQUE SPECIFICATIONS

ITEM
Flywheel retaining nut
Crankcase cover to block bolts
Starter/Generator
bracket to block bolts
Oil drain plug
Fan housing screws
Fan shroud screws
Bolts marked with "4"
(when used with nuts)

ADJUSTMENTS AND SETTINGS

ITEM
Spark plug gap (standard)
Ignition coil air gap (standard)
Compression pressure (min.)
(with automatic compression release)
Engine RPM
* Portable Refreshment Center or Cafe Express
SIZE
M18
M8
M8
M14
M6
M6
M8
M6
M5
3170 (±30) RPM (Turf 2 with 2-wheel brakes)
3170 (±30) RPM (Turf 2 with 4-wheel brakes)
3050 (±30) RPM (Turf 2 with 4-wheel brakes and PRC*)
2005 FE350 Gasoline Vehicle Maintenance and Service Supplement
100 ft-lb (135 N·m)
22 ft-lb (31 N·m)
16.5 ft-lb (23 N·m)
16.5 ft-lb (23 N·m)
90 in-lb (10 N·m)
25 in-lb (2.8 N·m)
130 in-lb (15 N·m)
50 in-lb (5.9 N·m)
30 in-lb (3.4 N·m)
LIMITS
0.027 to 0.031 in. (0.69 to 0.79 mm)
0.012 in. (0.304 mm)
71 psi (483 kPa)
3050 (±30) RPM (Turf 6)
3170 (±30) RPM (Carryall 2)
3650 (±30) RPM (Carryall 2 Plus)
3050 (±30) RPM (Carryall 2 Plus with PRC*)
3050 (±30) RPM (Carryall 6)
3050 (±30) RPM (Villager 6 and 8)
3050 (±30) RPM (TransPorter 4 and 6)
13
Engine Installation
LIMITS
Page 13-11