Club Car FE350 2005 Maintenance Service Supplement page 162

16
UNITIZED TRANSAXLE
Unitized Transaxle Removal, Continued:
4. Detach all wires, hoses, etc. connecting the powertrain to the vehicle.
4.1. Disconnect the carburetor vent tube from the carburetor (Figure 16-9, Page 16-8).
4.2. Disconnect the air intake hose from the carburetor (Figure 16-10, Page 16-8).
Figure 16-9 Fuel Vent Tube
4.3. Disconnect impulse line from fuel pump (Figure 16-11, Page 16-8).
4.4. Loosen the hose clamp and then disconnect the fuel line from the carburetor. To prevent spilling
fuel, the disconnected end of the line can be plugged with a 1/4-inch bolt (Figure 16-12,
Page 16-8).
IMPULSE LINE
Figure 16-11 Impulse Line
Page 16-8 2005 FE350 Gasoline Vehicle Maintenance and Service Supplement
VENT TUBE
Unitized Transaxle Removal
Figure 16-10 Air Intake Hose
FUEL LINE
Figure 16-12 Fuel Line